Table of Contents
Advertisement
4.10
Make an Internal Call
This feature is applicable when there are at least two registered handsets or one handset and retro base registered in the system. It allows you
to make internal calls, transfer external calls from one handset to another handset or from one handset to the retro base and make conference
calls. If the called handset or retro base is not answered within 60 seconds, the called handset or retro base will stop ringing and the calling
handset will return to standby mode.
4.10.1 Intercom Another Handset
]
1. In idle mode, press
/ RIGHT SOFT KEY and the numbers of the registered handsets and retro base will display except the calling
handset.
2. Enter the desired handset number to intercom with.
3. The called handset rings and press
Note:
If only two handsets are registered to the base station, press
4.10.2 Intercom the Retro Base
]
1. In idle mode, press
/ RIGHT SOFT KEY and the numbers of the registered handsets and retro base will display except the calling
handset.
7
2. Press
to call the retro base.
3. The called retro base rings and press
Note:
If only one handset and retro base are registered in the system, press
4.10.3 Call All Handsets and Retro Base
]
1. In idle mode, press
/ RIGHT SOFT KEY and the numbers of the registered handsets and retro base will display.
9
2. Press
to ring to all registered handsets and retro base.
19
T
on the called handset to establish the internal call.
]
/ RIGHT SOFT KEY will call another handset immediately.
s
on the called retro base to establish the internal call.
]
/RIGHT SOFY KEY will call the retro base immediately.
Hide quick links:
Advertisement
Table of Contents
