Store A Redial Number Into The Phonebook; Delete A Redial Number; Delete The Entire Redial List; Find The Handset - VTech VT2032 User Manual

4.8.2

Store a Redial Number into the Phonebook

1. Follow Steps 1 and 2 in section 4.8.1.
U D
2. Press and / to select ADD TO PB.
3. Press OK to enter the name.
4. Press OK to store the redial number into the phonebook.
5. Press OK to select phonebook melody.
U D
6. Press / to browse the melody list. The respective melody will be played when browsing the melody list.
7. Press OK to confirm.
4.8.3

Delete a Redial Number

1. Follow Steps 1 and 2 in section 4.8.1.
U D
2. Press and / to select DELETE.
3. Press OK to confirm.
4.8.4

Delete the Entire Redial List

1. Follow Steps 1 and 2 in section 4.8.1.
U D
2. Press and / to select DELETE ALL.
3. Press OK to confirm.
4. Press OK to confirm again.
4.9

Find the Handset

You can locate the handset by pressing
"PAGING" is displayed on the LCD. You can stop the paging by pressing
base again.
Note:
If there is an incoming call during paging, the phone will ring with the incoming call instead of paging.
G
on the base station. All the handsets registered to the base will produce the paging tone and
T O ]
/ / / RIGHT SOFT KEY on any handset or
G
on the
18