Table of Contents
Advertisement
Group Sequence
The following function is available only if a Group Sequence
has been previously established through the Administration
Console.
1. As described earlier, a Group Sequence determines
which monitor is to be assigned to which camera.
Therefore, selecting a monitor is not required.
2. Select a desired Group Sequence Number by pressing
the Numeric keys.
3. Press the [GROUP SEQ] key to run a group sequence
forward on the assigned monitors.
The selected Group Sequence Number (G4) with "R"
sign (indicate running status) is displayed on the active
monitor.
INFORMATION
Entry:4
GROUP
PRESET
OPE ID
GROUP
SEQ
TOUR
SEQ
OSD
4. To pause the sequence, select one of the monitors that
are being run on the selected group sequence, then
press the [PAUSE] key.
The "P" sign (indicating the pause status) is displayed
at the Group Sequence Number on the assigned moni-
tor.
5. Press the [FWD RUN] key to restart a Group Sequence
forward from the next step that was previously paused
by pressing the PAUSE key.
6. Press the [NEXT] key to move the sequence one frame
to the next step from the step that was previously
paused by pressing the PAUSE key.
7. Press the [PREV] key to move the sequence one frame
to the previous step from the step that was previously
paused by pressing the PAUSE key.
8. To stop the sequence, select one of the monitors that
are being run on the selected group sequence, then
press the [STOP] key.
89
INFORMATION
Grp Seq 4 Fwd Run
PREV
NEXT
1
2
3
T&D
CAM ID
GEN
S-CTL ID
VER
ALM S
VLD S
SYS S
PAUSE
STOP
4
5
6
( ALARM )
MSTATUS
ALL
VLD H
ALM H
R E V
F W D
7
8
9
RU N
RU N
0
MONITOR
CLEAR
(ESC)
LOCK
OSD SERVICE
SHIFT
BLK
EXIT
INFORMATION
Grp Seq 4 Pause
Advertisement
Table of Contents
