Table of Contents
Advertisement
INSTALLATIONS
The installation described below should be made by
qualified service personnel or system installers and
should conform to all local codes.
INSTALLATION OF SYSTEM
COMPONENTS
Installing a Character Board
If the WJ-PB85D01 Character Board is installed on the WJ-
PB85X08 Camera Input Board, follow the procedure shown
below.
1. Position jumper connectors (CN103, CN203, CN303,
CN403, CN503, CN603, CN703, and CN803) on the
Camera Input board as shown below.
2. Insert the connectors of the Character board into the
specified connectors (CN102, CN202, CN302, CN402,
CN502, CN602, CN702, and CN802) on the Camera
Input board.
58
3
1
CN103
3. Place the Character board on the Camera Input board
and plug in the boards.
4. Fix both boards with the two supplied screws (M3x6)
as shown below.
Advertisement
Table of Contents
