Table of Contents
Advertisement
Set Port
1.
Press Menu and move to 'Network->Address-
>Port' page.
2. Set port for 'Remote monitoring, Playback and
setup. Default is '10101'.
* Set Live port and other port sets automatically.
3. Set port for Web viewer. Default is '80'.
4. Set RTSP port. Default is '554'.
5. Use UPnP: This feature enables auto port
forwarding on router.
DDNS setup
For remote access, use DDNS service with DDNS server setup.
1. Press Menu and move to 'Network-DDNS'.
2. Check 'Use DDNS' option.
3. Enter 'Product ID' and press 'Update' to check it
access DDNS server normally.
4. Press 'Ok' to save changes.
* To use DDNS, system should be connected to
Internet.
* For more details about DDNS setup, see the
manual of your router.
37
Advertisement
Table of Contents
