Table of Contents
Advertisement
REMOTE setup connected Devices
1. Connect NVR first.
* if not connected, press
connect device first.
2. Click
button on top of right and select
'Remote Setup'.
3. Display connected device's setup screen as
same as local device.
*Setup menu and usage is same as local device.
4. To exit setup, press 'menu->exit'.
Remote upgrade
1. Prepare upgrade file from your provider.
2. Go to 'Remote Setup' and move to 'System-
>Information' page.
3. Press 'Upgrade' button and select upgrade file.
4. Proceed upgrade.
* Do not close or power off system until the upgrade process is over.
connect
button and
54
Advertisement
Table of Contents
