Table of Contents
Advertisement
System Notification
Notify system status through alarm and Callback.
1. Set level of Storage full. System start notification
when storage reaches this level.
2. Set temperature level you desired to get
notification on S.M.A.R.T. Threshold.
3. Set alarm and Notification.(see examples above)
G-Sensor Notification
Detect movements such as sudden acceleration, stop and suspected as accident.
1. Press Menu and move to 'Event->G-Sensor'
page.
2. Check 'Use G-sensor'.
3. Press 'Record' field and select channels to be
recorded when event triggered.
4. Press 'Alarm' field and select channels for alarm
activation.
5. In 'Notification' field, select Client IP address
and e-mail that will receive event notification.
6. Set sensitivity of each x, y, and z axis.
* If G-sensor included IO box DIP switch configuration is wrong, it would generate
unnecessary alarms. Please check DIP switch configuration when installation.
41
Advertisement
Table of Contents
