Table of Contents
Advertisement
System Upgrade
Upgrade system firmware with new version.
1. Press Menu and move to 'SYSTEM->Information'
system page.
2. Insert USB memory which contains update file.
3. Press 'Update' button and select file.
4. Start upgrade with selected file.
5. System restarts automatically when update
completed.
Note: Do not remove USB or power during updating.
Set Date and time
1. Press menu move to 'System-> Date&time'.
2. Set time zone and choose option 'daylight saving
time'.
* Configure Beginning and End day.
3. Set date and time with display format selection.
4. Press 'OK' to save changes.
NTP setting
1. Select 'NTP' tab menu on Date &Time setup
menu.
2. Tick 'Use NTP' option
3. Press
to enter time server.
4. Enter time server name with virtual keyboard.
5. Set update interval and press update button.
*Internet access required
Note: NTP is not essential for NVR operation. Time
Sync. may not be completed due to heavy traffic or
delays from time sync. server.
23
Advertisement
Table of Contents
