Nvr Boot Up; System Initialization; Startup Wizard - Samsung Wisenet SNK-B73040BW User Manual

NVR Boot up

systeM initiAlizAtion

After connecting the NVR power cable to wall outlet, the NVR system initializing
screen will appear.
It may take 40 seconds to start up, and the screen may beep 5~6 times.
`
M

stArtup wizArd

After the NVR startup is complete, the startup wizard will display.
Wizard setting menu includes: Homepage, admin password setting, hard drive management, video recording schedule, basic
system configuration, network setup, e-mail and DDNS setting. You can click on "Don't show this window next time" if you do not
wish to have the wizard setting to appear next time.
1. Set Admin Password: Please create a user name and password for your
device. Password MUST be 8~13 characters long. When password is 8~9
characters long, it should be with at least a combination of letters, digits
and special symbols. If it is 10~13 characters long, it should be with at
least a combination of two types of characters. 4 or more contiguous or
repeated characters or key arrangement are prohibited, for example 1111,
1234, abcd, qwerty.
use virtual Keyboard
Virtual keyboard window will be displayed for input. Click on the desired characters to apply them. Press <Shift> to switch to
input of upper-case letters.
Press <Shift> again to switch to input of special characters. The virtual keyboard is used in the same way as with physical
keyboard.
For input of password, use letters and special characters other than <\> and <">.
English _9