Monogram ZET1PL1SS Technical Service Manual page 36

IMPORTANT: The lower wattage outer element
/
utilizes -in. terminal connections. The higher
3
16 16
wattage inner element utilizes ¼-in. terminal
connections.
5. Disconnect the wires from the bake element.
6. Carefully move the insulation to access and
remove the two ¼-in hex-head screws that
attach the bake element to the oven as shown.
7. Place a fl at-head screwdriver in one of the
terminal entry holes and push the element
forward until the terminals clear the entry holes
in the back of the oven.
8. Grasp and pull the element out from the left side
of the oven.
Note:
• When reinstalling the element, it may be helpful
to grasp and pull the element terminals through
the entry holes using long-nose pliers.
• When reconnecting the elements, make sure
the connectors are securely attached to the
element terminals.
• Upon reassembly, ensure displaced insulation
around oven and components is returned to it's
original position.
– 36 –