Monogram ZET1PL1SS Technical Service Manual page 18

Oven Removal
The replacement of certain components require
oven removal. (See
Oven Component Access Chart
WARNING: The oven is heavy and requires two
people to remove it from the installation.
To remove the oven:
1. Remove oven doors and racks. ( See
and
Assembly Oven Racks
2. Remove the 2 Phillips-head screws that attach
the metal bottom trim to the bottom edge of the
cabinet. Remove the trim.
3. Remove the 4 Phillips-head screws (2 on each
side) from the side trim that hold the oven in
place.
Double Wall Oven
.)
Door
.)
– 18 –
4. Pull the oven slightly forward to access some
components (See
Oven Component Access Chart
or if removing it completely, utilize a table or
platform in front of the oven and pull the oven
completely out.
Note: When reinserting ovens into cabinet opening,
ensure conduit is properly positioned behind ovens.
(See the
Installation Instructions
Side Access Panels
To remove each side access panel:
1. Remove the ¼-in. hex-head screws that hold
each side trim in place. The single wall oven has
4 hex-head screws. The double wall oven has 8
hex-head screws.
Double Wall Oven
Side Trim Screws
Note: Single wall ovens do not have the black heat
shield.
)
manual.)
Heat Shield
Heat Shield
(Continued next page)