Blower Operation - Jøtul GF 300 BV Allagash Installation And Operation Instructions Manual

Figure 35. Attach Blower to
the stove bottom and
connect wires to Snapstat
and female control quick
connect.

Blower Operation

The optional variable-speed blower will enhance heat
circulation around the firebox and out into the room.
The blower is controlled by a heat activated switch
(snapstat) that will ONLY function when the control
switch is in AUTO setting. After the fire has been burn-
ing for a time, the snapstat will react to the heat and
activate the blower. Fan speed may be manually ad-
justed with the rheostat knob. If the burner turns off,
the blower will be shut off automatically when the
stove cools down.
If automatic blower circulation is not desired, place
the blower control switch in the MANUAL position.
Speed
Control
Figure 36. Blower Controls
Snapstat
Connectors
M6 x 20 mm
Figure 37. Blower Wiring Diagram
Manual or
Automatic
Modes
LABEL ALL WIRES PRIOR TO DISCONNECTION WHEN SERVIC-
ING CONTROLS. WIRING ERRORS CAN CAUSE IMPROPER AND
DANGEROUS OPERATION.
VERIFY OPERATION AFTER SERVICING.
Au moment de l'entrentien des commandes, etiquietez tous
le fils avant le debranchement. es erreurs de ceblage peuvent
entra tun fonctionnement inadequat et dangereux.
Female
Quickconnector
Hex Bolts
G
W
W
G
BL
BK
POWER
GY
SNAPSTAT
SUPPLY
P P P
BL
GY BR
AUTO OFF MANUAL
CAUTION:
ATTENTION:
Male
Quickconnector
BLOWER
BK
BK BK
P
BK BK BK
P
RHEOSTAT
BR
P = QuickConnector Pin
SWITCH
21