Table of Contents
Advertisement
The buttons/control dial
Setting of the temperature for the left side, operation of the seat heating of
7
the left front seat
Automatic mode
8
AUTO
Switching off Climatronic
9
OFF
Setting the blower speed
10
Depending upon vehicle equipment: Button for directly switching on/off the
11
auxiliary heating
» Fig. 93
on page 95 or switching on/off the windscreen
heater
» Fig. 35
on page 50
Switching on/off of the temperature setting in dual mode
12
Switching the cooling system on/off
13
Setting of the temperature for the right side, operation of the seat heating of
14
the right front seat
Note
Below the top row of buttons is located the interior temperature sensor. Do not
stick anything on or cover the sensor, otherwise it could have an unfavourable ef-
fect on the Climatronic.
Automatic mode
First read and observe the introductory information given on page 91.
The automatic mode is used in order to maintain a constant temperature and to
demist the windows in the interior of the car.
Switching on
›
Set a temperature between +18 °C and +26 ℃.
›
Move the air outlet vents 3 and 4
directed slightly upwards.
›
Press the button
» Fig. 92
AUTO
8
right or left corner lights up, depending on which mode was last selected.
If the warning light in the top right corner of the button
matronic operates in "HIGH" mode. The "HIGH" mode is the standard setting of
the Climatronic.
92
Using the system
DUAL
» Fig. 88
on page 85 so that the air flow is
on page 91. The indicator light in the top
lights up, the Cli-
AUTO
When pressing again the button
mode and the indicator light in the top left corner lights up. The Climatronic uses
only in this mode the lower blower speed. However taking into account the noise
level, this is more comfortable, yet be aware that the effectiveness of the air con-
ditioning system is reduced particularly if the vehicle is fully occupied.
By pressing the button
again, it is changed to "HIGH" mode.
AUTO
Automatic mode is switched off by pressing one of the buttons for the air distri-
bution or by increasing/decreasing the blower speed. The temperature is never-
theless regulated.
Switching cooling system on and off
First read and observe the introductory information given on page 91.
›
Press the
» Fig. 92
on page 91 button. The warning light lights up in the but-
ton.
›
Pressing the button
again switches off the air conditioning system. The indi-
cator light in the button goes out. Only the function of the ventilation remains
active when no lower temperature than the outside temperature can be
reached.
Setting the temperature
First read and observe the introductory information given on page 91.
The interior temperature for the left and right side can be set separately.
›
The temperature for both sides can be set with the control dial
page 91 after switching on the ignition.
›
If you wish to set the temperature for the right side, turn the control dial
The indicator light in the button
temperatures for the left and right side can be set.
If the indicator light in the button
sides cannot be set with the control dial
pressing the button
. The indicator light in the button goes out.
DUAL
The interior temperature can be set between +18 °C and +26 ℃. The interior tem-
perature is regulated automatically within this range. If a temperature lower than
+18 °C is selected, a blue symbol lights up at the start of the numerical scale. If a
, the Climatronic changes into the "LOW"
AUTO
7
lights up, this indicates that differing
DUAL
is illuminated, the temperature for both
DUAL
. You can reactivate this function by
7
» Fig. 92
on
.
14
Hide quick links:
Advertisement
Chapters
Table of Contents
