Scanning Sequence Examples; Errors While Scanning; Miscellaneous Default Parameters - Symbol LS2208 Product Reference Manual

13 - 2 Symbol LS2208 Product Reference Guide

Scanning Sequence Examples

In most cases you need only scan one bar code to set a specific parameter value.
Parameters, such as Prefix Value, require that you scan several bar codes in the proper sequence. Refer to each
individual parameter for descriptions of this procedure.

Errors While Scanning

Unless otherwise specified, if you make an error during a scanning sequence, just re-scan the correct parameter.

Miscellaneous Default Parameters

Table 13-1 lists the defaults for miscellaneous scanner options parameters. If you wish to change any option, scan
the appropriate bar code(s) provided in the Miscellaneous Scanner Parameters section beginning on
NOTE See
miscellaneous default parameters.
Miscellaneous Scanner Options Default Table
Table 13-1
Transmit Code ID Character
Prefix Value
Suffix Value
Scan Data Transmission Format
FN1 Substitution Values
Transmit "No Read" Message
Synapse Interface
Appendix A, Standard Default Parameters
Parameter
for all user preferences, hosts, symbologies, and
Default
None 13-3
7013 <CR><LF> 13-4
7013 <CR><LF> 13-4
Data as is 13-4
Set 13-6
Disable 13-6
Standard 13-7
page
Page Number
13-3.