Nixdorf Beep/Led Options; Ignore Unknown Characters - Symbol LS2208 Product Reference Manual

Nixdorf Beep/LED Options

When Nixdorf Mode B is selected, this indicates when the scanner should beep and turn on its LED after a decode.

Ignore Unknown Characters

Unknown characters are characters the host does not recognize. When Send Bar Codes with Unknown Characters
is selected, all bar code data is send except for unknown characters, and no error beeps sound on the scanner.
When Do Not Send Bar Codes With Unknown Characters is selected, bar code data is sent up to the first unknown
character and then an error beep will sound on the scanner.
*Normal Operation
(Beep/LED immediately after decode)
Beep/LED After Transmission
Beep/LED After CTS Pulse
*Send Bar Code
(with unknown characters)
Do Not Send Bar Codes
(with unknown characters)
RS-232 Interface 6 - 21