Nixdorf Mode A/B And Opos/Jpos Beep/Led Options - Symbol LS 3408 Product Reference Manual

Nixdorf Mode A/B and OPOS/JPOS Beep/LED Options

When Nixdorf Mode A, Nixdorf Mode B or OPOS/JPOS is selected, this parameter indicates when
the scanner should beep and turn on its LED after a decode.
The Beep/LED After CTS Pulse option is not valid when Nixdorf Mode A is
selected.
*Normal Operation
(Beep/LED Immediately After Decode)
Beep/LED After Transmission
Beep/LED After CTS Pulse
6-23
RS-232 Interface