Table of Contents
Advertisement
7
OTHER FUNCTIONS
■ Automatic foghron (Continued)
q Push [O], then push [8•
Push
,
then push
w Rotate [SELECTOR] to select the desired foghorn pat-
tern, then push [ENT].
• 'UNDERWAY,' 'STOP,' 'SAIL,' 'TOW' are selectable. (p. 45)
• Even if [ENT] hasn't been pushed, the display automatically
changes to the next step after about 5 seconds of inactivity.
e Rotate [SELECTOR] to adjust the foghorn level, then
push [ENT].
• The foghorn level is adjustable in 31 steps.
• Even if [ENT] hasn't been pushed, the display automatically
changes to the next step after about 5 seconds of inactivity.
Rotate
9
9
6#)
6#)
(1)*140
(1)*140
Foghorn
'06 1-
'06
1-
level
The foghorn pattern, selected
in step w, is displayed.
r To return to normal operation, repeat step q.
When a DSC Call is received, the automatic foghorn function
is interrupted with an automatic return to the transceiver mode.
46
The function LCD displays 'Receiving DSC Calls.' (p. 34)
] to activate the foghorn. .
FOG
9
9
+06
+06
6#)
6#)
70&'49#;
70&'49#;
5612
5612
'06 1-
'06
1-
%#..+0)
%#..+0)
+06
+06
Push
9
9
+06
+06
6#)
6#)
%#..+0)
%#..+0)
(1)*140
(1)*140
70&'49#;
70&'49#;
%#..+0)
%#..+0)
■ RX speaker function
The IC-M604A has an RX speaker function. When this func-
tion is turned ON, the received audio can be heard on the
deck or tower through a hailer speaker.
Connect a hailer speaker as described on page 50.
q Push [O], then hold down [7•
the RX Speaker mode.
• "
" appears.
Push
,
then hold down
4:
4:
for 1 second
'06 1-
'06
w Rotate [SELECTOR] to adjust the audio output level, then
push [ENT].
e To return to normal operating mode, repeat step q.
While in the RX speaker mode, rotate [SELECTOR]
while holding down [7•
HAIL
the audio output level. After adjusting, then push [ENT].
• Rotate [SELECTOR] within 1 second after pushing [7•
or the transceiver returns to the normal operating mode.
] for 1 second to enter
HAIL
9
9
+06
+06
4:
4:
6#)
6#)
1-
%#..+0)
%#..+0)
] after pushing [O], to adjust
HAIL
],
Advertisement
Table of Contents
