D Transmitting A Position Reply Call; D Transmitting A Polling Reply Call - Icom IC-M604A Instruction Manual

D Transmitting a Position Reply Call

Transmit a Position Reply Call when a Position Request Call
is received.
q Enter "
❮ ❯ ➪ ❮
(Push [MENU]) (Rotate [SELECTOR], then push [ENT].)
w Rotate [SELECTOR] to select the desired individual ad-
dress or ID code, then push [ENT].
When a GPS receiver (NMEA0183 ver. 2.0 or 3.01) is
connected, next steps e and r (Current position/time
programming) do not appear. Go to step t.
e The position information appears. Edit your position data
(latitude and longitude) by pushing the keypad keys. (p. 18)
r After editing the position data, then push [ENT] to set. Edit
the current UTC time by pushing the keypad keys, then
push [ENT].
&5% &5% /GPW
2QUKVKQP 4GRN[ 2QUKVKQP 4GRN[ 4GCF[
%.4 'ZKV %.4 'ZKV  '06 1-
t Push [ENT] to transmit the Position Reply Call to the se-
lected station.
• Your position data is transmitted, when [ENT] is pushed.
" in the DSC menu.
❯
/GPW
4GCF[
'06 1-
D Transmitting a Position Report Reply Call
Transmit a Position Report Reply Call when a Position Re-
port Call is received.
q Enter "
❮ ❯ ➪ ❮
(Push [MENU]) (Rotate [SELECTOR], then push [ENT].)
w Rotate [SELECTOR] to select the desired individual ad-
dress or ID code, then push [ENT].
e Push [ENT] to transmit the Position Report Reply Call to
the selected station.

D Transmitting a Polling Reply Call

Transmit a Polling Reply Call when a Polling Request Call is
received.
q Enter "
❮ ❯ ➪ ❮
(Push [MENU]) (Rotate [SELECTOR], then push [ENT].)
w Rotate [SELECTOR] to select the desired individual ad-
dress or ID code, then push [ENT].
e Push [ENT] to transmit the Polling Reply Call to the se-
lected station.
6
DSC OPERATION
" in the DSC menu.
❯
" in the DSC menu.
❯
6
31