Position And Time Programming - Icom IC-M604A Instruction Manual

6
DSC OPERATION

■ Position and Time programming

A Distress call should include the ship's position and time
data. If no GPS is connected, your position and UTC (Uni-
versal Time Coordinated) time should be manually input.
They are automatically included when a GPS receiver
(NMEA0183 ver. 2.0 or 3.01) is connected.
• Manual programming is disabled when a GPS receiver
(NMEA0183 ver. 2.0 or 3.01) is connected.
• Manually programmed position/time data will be held for
only 23.5 hours.
q Enter "
❮ ❯ ➪
(Push [MENU])
w Edit your position (latitude and longitude) data by pushing
the keypad keys.
• Push [6• ] to edit N; North latitude or [7•
MNO
S; South latitude.
• Push [3• ] to edit E; East longitude or [9•
DEF
W; West longitude.
• Rotate [SELECTOR] to move the cursor backward or forward.
• Push [CE] to clear the position data.
• Push [CLR] to cancel and exit the mode.
18
" in the DSC menu.
❮ ❯
(Rotate [SELECTOR], then push [ENT].)
PRS
WXY
e After editing the position data, then push [ENT] to set the
position. Then edit the current UTC time by pushing the
keypad keys.
• Rotate [SELECTOR] to move the cursor backward or forward.
• Push [CE] to clear the time.
• Push [CLR] to cancel and exit the screen.
] to edit
] to edit
r Push [ENT] to set the time and return to the DSC menu.
t Push [CLR] or rotate [SELECTOR] to select "
then push [ENT] to return to the normal operating mode.
&5% &5% /GPW /GPW
+PRWV 2QUKVKQP +PRWV 2QUKVKQP
.CVKVWFG .CVKVWFG
AA’AAAAA0 AA’AAAAA0 0WNN 0WNN
.QPIKVWFG .QPIKVWFG
AA’AAAAA9 AA’AAAAA9 0WNN 0WNN
%' 0WNN %' 0WNN &CVC &CVC
%.4 %.4 'ZKV 'ZKV  '06 1- '06 1-
&5% &5% /GPW /GPW
+PRWV 76% +PRWV 76% 6KOG 6KOG
AA AA AA AA 0WNN 0WNN
%' %' 0WNN 0WNN &CVC &CVC
%.4 %.4 'ZKV 'ZKV  '06 1- '06 1-
,"