D Transmitting An All Ships Call - Icom IC-M604A Instruction Manual

D Transmitting an All Ships Call

Large ships use Channel 70 as their 'listening channel.' When
you want to announce a message to all ships within range,
use the 'All Ships Call' function.
q Enter "
❮ ❯ ➪ ❮
(Push [MENU]) (Rotate [SELECTOR], then push [ENT].)
w Rotate [SELECTOR] to select a desired category, then
push [ENT].
• The selectable category may differ, depending on the pro-
grammed setting. Ask your dealer for the selectable categories.
&5% /GPW &5% /GPW
5GNGEV 5GNGEV %CVGIQT[ %CVGIQT[
5CHGV[ 5CHGV[
7TIGPE[ 7TIGPE[
%.4 %.4 'ZKV 'ZKV  '06 1- '06 1-
" in the DSC menu.
❯
e Rotate [SELECTOR] to select a desired traffi c channnel,
then push [ENT].
• The selected channel is displayed.
&5% &5% /GPW
5GNGEV 5GNGEV 6TCHHKE %* 6TCHHKE %*
 
&5% &5% /GPW
#NN 5JKRU #NN 5JKRU %CNN
%.4 'ZKV %.4 'ZKV  '06 1-
%.4 %.4 'ZKV 'ZKV  '06 1-
r Push [ENT] to transmit the All Ships Call.
• Channel 70 is selected and the All Ships Call is transmitted.
t After the call has been transmitted, the following message
is displayed.
#NN 5JKRU #NN 5JKRU %CNN
6: 6: %QORNGVG %QORNGVG
%.4 'ZKV %.4
y Push [CLR] to exit and the transceiver automatically se-
lects Channel 16.
• Even if [CLR] hasn't been pushed, the transceiver automatically
selects Channel 16 after 2 seconds of inactivity.
6
DSC OPERATION
/GPW
/GPW
%CNN 4GCF[ 4GCF[
'06 1-
'06 1-
%CNN
'ZKV
6
27