I Rx Speaker Function - Icom iM504 Instruction Manual

• While in the Intercom mode, the transceiver functions
(transmit and receive) are interrupted. If the transceiver
is in transmit condition, the Intercom function is not avail-
able.
• When a DSC call is received, the intercom function is in-
terrupted with an automatic return to the transceiver
mode. The transceiver's display indicates 'Receiving
DSC calls.' (p. 41)
• When a WX alert is received, "W W X X A A L L E E R R T T " blinks and a
beep sounds. The WX alert sounds after the Intercom
use is finished.
OTHER FUNCTIONS

I RX Speaker function

The IC-M504 has an RX Speaker function. When this func-
tion is turned ON, the received audio can be heard on the
deck or tower via an external speaker or hailer speaker.
Connect an external speaker or hailer speaker as described
on p. 58.
q Push and hold [HAIL•RX
Speaker mode.
• "R R X X
" appears
• Rotate [DIAL] to adjust the audio output level, push
[DIAL•ENTER].
Push and hold
RX RX
for 1 sec.
15 15
<ENT ˘ OK> <ENT
w To return to normal operation, push and hold [HAIL•RX
for 1 sec.
While in the RX Speaker mode, rotate [DIAL] while push-
ing and holding [HAIL•RX
level. After adjusting, push [DIAL•ENTER].
• Rotate [DIAL] within 1 sec. after pushing [HAIL•RX
wise the transceiver returns to the normal operation.
7
] for 1 sec. to enter the RX
25W 25W INT INT
RX RX
TAG TAG
OK> CALLING CALLING
] to adjust the audio output
]. Other-
7
]
51