Toro TMC-212 User Manual page 5

373-0319 TCM 212 Doc2 12/20/04
Controller Components
The following are brief descriptions of the controller
components and display elements. Each of these items
will be explained in further detail within the appropriate
programming, operating and installation sections of this
guide.
1 - LCD Display
A - "Start Time" symbol is displayed when setting the
program start times.
B - "Well Recovery" symbol is displayed when well
recovery time delay is in use.
C - Program start time identification numbers 1–4.
D - Main display of various time values and prompts.
E - Program A, B and C identifiers.
F - "Watering On" symbol is displayed when a water-
ing station is running. Symbol blinks when watering
is paused.
G - "Watering Off" symbol is displayed when Rain
Delay feature is active.
H - "Percent" symbol is displayed when the Season
Adjust feature is in use.
I - Watering Station identification numbers.
J - Day of the week identifiers.
K - "Run Time" symbol is displayed when setting the
watering station run times.
12:30 PM Page 3
2 - Control Buttons
3 - Control Dial – Selects all controller programming
+/ button – Increases the time display, scrolls
ON
forward through the program information and selects
watering days.
–/ button – Decreases the time display, scrolls
OFF
backward through the program information and
removes watering days.
button – Advances to the next portion of program
NEXT
information. Resumes watering if paused. Advances
through stations manually when watering.
button – Selects and starts manual
MANUAL START
watering operations.
and operation controls (except Manual Start).
Control Dial Positions
– The normal dial position for all automatic
RUN
and manual operations.
/ – Enables the clock time
CURRENT TIME DAY
and day to be set.
– Enables the watering day
WATERING DAYS
schedules to be set and reviewed.
– Enables the program start times
START TIMES
to be set and reviewed.
– Enables the station run time to
STATION TIMES
be set and reviewed.
( )
CONTINUED
3