Setting An Interval Schedule - Toro TMC-212 User Manual

373-0319 TCM 212 Doc2 12/20/04

Setting an Interval Schedule

Turn the control dial to the
position.
Check the
PROGRAMS
reposition the switch to select the desired program.
The current watering schedule will be displayed. If
Int (Interval) is not displayed, press the +/
–/ button as needed to select Int.
OFF
Press the button. The current Interval number
NEXT
(1–7) will begin flashing. The day of the week on
which the Interval will start will be shown.
To change the Interval number, press the +/
–/ button until the desired number is flashing.
OFF
Press the button. The Interval start day will
NEXT
begin flashing.
To change the Interval start day, press the +/
button or the –/ button until the desired day is
OFF
flashing.
8. To set an Interval schedule for another program,
repeat all of the steps beginning at step
When you have completed setting the Interval
schedule for each program (as needed), return the
control dial to the
RUN
Note: The Day Exclusion feature enables you to
select any day(s) of the week to be excluded and
remain off when using an Interval or Odd/Even
watering schedule.
See page 25 for detailed information.
12:30 PM Page 23
WATERING DAYS
switch setting. If necessary,
or
ON
or
ON
ON
.
position.
3 2
9
6 7 5
4
1
7
3 5
4 6
3 5
7
23