Setting Fractional Resolution; Setting Fraction Resolution - Using The Preference Setting Mode - Calculated Industries 44080 Construction Master Pro Desktop v3.0 User Manual

SETTING FRACTIONAL RESOLUTION

The Construction Master Pro is set to display fractional answers in
16ths of an inch. All examples in this User's Guide are based on
1/16". However, you may select the fractional resolution to be dis-
played in other formats (e.g., 1/64", 1/32", etc.). The two methods of
changing fractional resolution are shown below.
Setting Fractional Resolution
— Using the Preference Setting Mode
KEYSTROKE
1. Access Preference Settings:
Ç ß
2. Access Next Fraction Subsetting:
+
+
+
+
+
+ (returns to 16ths)
3. To Permanently Set the Fractional Resolution You Have Selected
Above, press o (or any key) to set the displayed Fractional
Resolution and Exit Preference Settings.
o
4. To Recall Your Selected Fractional Resolution:
® /
* 1/16" is the default setting. The display may differ from the example depending on
what the resolution is currently set to.
DISPLAY
FRAC 0-1/16
INCH
FRAC 0-1/32
FRAC 0-1/64
FRAC 0-1/2
FRAC 0-1/4
FRAC 0-1/8
FRAC 0-1/16
STD 0-1/16
U ' G — 27
SER S UIDE
*
INCH
INCH
INCH
INCH
INCH
INCH
0.
INCH