Drywall Keys ( Not Available On Trig Model #4080); Footing Keys ( Not Available On Trig Model #4080); Polygon Key - Calculated Industries 44080 Construction Master Pro Desktop v3.0 User Manual

Drywall Keys (
Ç h
Footing Keys (
The Footing keys help you quickly estimate the volume of concrete
required for concrete footings.
Ç W
ß 6

Polygon Key

The Polygon function is handy for calculating multi-sided shapes
(such as found in concrete applications).
Ç R
16 — C
ONSTRUCTION
NOT AVAILABLE ON TRIG MODEL
Drywall Sheets — Calculates the number of 4x8,
4x9, and 4x12 sheets for an entered or calculated
area.
NOT AVAILABLE ON TRIG MODEL
Footing — Calculates total quantity of concrete
required for concrete footings based on an entered
wall length and footing size. Size based on the
default footing size of 1.8 square feet or 259.2
square inches (industry standard).
Store Footing Area — Used to store a value other
than the default footing size of 1.8 square feet (e.g.,
1 2 8 i i ß 6 stores a footing size of
128 square inches). This value is permanently stored
until you change it or perform a Clear All (Ç x).
To recall the stored setting, press ® 6.
Polygon — With an entered radius and number of
sides of a polygon-shaped figure, Ç R, calcu-
lates the following:
Press Result
1 Full Angle
2 Bi-Sect, or Half Angle
3 Side Length
4 Perimeter of Polygon
5 Area of Polygon
6 Redisplays Entered Radius
7 Redisplays Entered Number of Sides
M ® P
ASTER
#4080)
#4080)
/ T / D
RO RIG ESKTOP