Frequency Setting - Toshiba TOSVERT VF-S11 Instruction Manual

(3) Setting the frequency using the operation panel (
3
+
-
Note: Be sure to turn the VIA slide switch to the V (voltage) position.
Note: Be sure to turn the VIA slide switch to the I (current) position.

Frequency setting

1) Setting the frequency using external potentiometer
PP
: Setting frequency
VIB
using potentiometer
CC
* The input terminal VIA can be used in the same way.
= : VIA effective,
For more details, see 6.5.
2) Setting the frequency using input voltage (0~10V)
VIA
: Voltage signal 0-10mAdc
CC
* The input terminal VIB can be used in the same way.
= : VIA effective,
For more details, see 6.5.
3) Setting the frequency using current input (4~20mA)
+ VIA
: Current signal 4-20mAdc
-
CC
* Setting of parameters also allow 0-20mAdc.
Potentiometer
Setting frequency using the potentiometer (1-10kΩ, 1/4W)
For more detailed information on adjustments, see 6.5.
Frequency
= : VIB effective
Voltage signal
Setting frequency using voltage signals (0∼10V).
For more detailed information on adjustments, see 6.5.
= : VIB effective
Current Signal
Current signal Setting frequency using current signals (4~20mA).For
more detailed information on adjustments, see 6.5.
C-6
= or )
60Hz
0
MIN MAX
60Hz
Frequency
0
0Vdc 10Vdc
60Hz
Frequency
0
4mAdc 20mAdc
E6581158