Modifying Output Terminal Functions - Toshiba TOSVERT VF-S11 Instruction Manual

3) Sink logic/source logic input
6.3.3
• Function
6
Examples of application
Sink logic/source logic (input/output terminal logic) switching is possible.
For more details, see 2.3.2.

Modifying output terminal functions

: Output terminal selection 1A (RY-RC)
: Output terminal selection 2A (OUT-NO)
: Output terminal selection 3 (FLA, FLB, FLC)
: Output terminal selection 1B (RY-RC)
: Output terminal selection 2B (OUT-NO)
: Output terminal logic selection (RY-RC, OUT-NO)
Use the above parameters to send various signals from the inverter to external equipment.
By setting parameters for the RY-RC, OUT-NO and FL (FLA, FLB and FLC) terminals on the terminal
board, you can use 58 functions and functions obtained by combining them.
To assign only one function to output terminals, assign the function to
leaving to as they are set by default.
Function of FLA, B, C:
Can be set using parameter
Function of RY-RC:
Can be set using parameter
Function of OUT-NO:
Can be set using parameter
F-10
E6581158
and while
FLA
FLB
FL
FLC
RY
RY
RC
OUT
NO