Monitoring The Operation Status; Status Monitor Mode; Status Monitor Under Normal Conditions - Toshiba TOSVERT VF-S11 Instruction Manual

8. Monitoring the operation status

8.1

Status monitor mode

8.1.1

Status monitor under normal conditions

In this mode, you can monitor the operation status of the inverter.
To display the operation status during normal operation:
Press the
Setting procedure (eg. operation at 60Hz)
Item displayed
Parameter setting
mode
Direction of rota-
tion
Operation fre-
Note 1
quency command
Note 2
Load current
Note 3 Input voltage
Output voltage
Torque
Torque current
Inverter load factor
PBR cumulative
load factor
Input power
Output power
Operation fre-
quency
(Continued overleaf)
key twice.
M O D E
Key LED
operated display
.
Communi-
cation No.
The operation frequency is displayed (Operation at
60Hz). (When standard monitor display selection
is set at 0 [operation frequency])
The first basic parameter "
is displayed.
The direction of rotation is displayed.
FE01
( : forward run,
The operation frequency command value (Hz/free
FE02
unit) is displayed.
The inverter output current (load current) (%/A) is
FE03
displayed.
FE04 The inverter input (DC) voltage (%/V) is displayed.
FE05 The inverter output voltage (%/V) is displayed.
FE18 The torque (%) is displayed.
FE20 The torque current (%/A) is displayed.
FE27 The inverter load factor (%) is displayed.
The cumulative load factor of the braking resistor
FE25
(%) is displayed.
FE29 The inverter input power (kW) is displayed.
FE30 The inverter output power (kW) is displayed.
The operation frequency (Hz/free unit) is dis-
FD00
played.
H-1
E6581158
Description
" (history function)
: reverse run)
8