Husky HD1500 Operator's Manual page 21

PROBLEM OR CONCERN
Wand - Attaching
Wand - Removing
English
POSSIBLE CAUSE
21
SOLUTION
To attach the Wand apply some moderate
downward pressure on the Wand (In the direction
of the trigger) while simultaneously twisting the
wand a 1/4 of a turn counterclockwise. (It may
help if you set the gun vertically on a flat surface
with the wand pointing upwards). The two tabs on
the end of the Wand must slide all the way in before
the Wand will twist and lock. If this does not work
remove the o-ring from the end of the wand and
attach it without the o-ring. If the wand attaches,
you will need to replace the o-ring. Contact us at
customerservice@huskypowerwasher.
com or order a replacement directly online at
www.huskypowerwasher.com.
Release the back pressure in the Gun/Hose. Re-
move the Garden Hose from the unit and squee-
ze the trigger of the Gun. Apply some moderate
downward pressure on the Wand (In the direc-
tion of the trigger) while simultaneously twisting
the wand a 1/4 of a turn clockwise. (It may help
if you set the gun vertically on a flat surface with
the Wand pointing upwards). For additional as-
sistance you can email us at customerservice
@huskypowerwasher.com.