Page of 22

Husky HU80522 Operator's Manual

Husky gasoline pressure washer operator's manual.
OPERATOR'S MANUAL
GASOLINE PRESSURE WASHER
HU80522
Your pressure washer has been engineered and manufactured to our high standard for dependability, ease of operation,
and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator's manual before using
this product.
Thank you for your purchase.
SAVE THIS MANUAL FOR FUTURE REFERENCE

   Related Manuals for Husky HU80522

   Summary of Contents for Husky HU80522

  • Page 1

    OPERATOR’S MANUAL GASOLINE PRESSURE WASHER HU80522 Your pressure washer has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using...

  • Page 2: Table Of Contents

     Introduction ... 2  Important Safety Instructions ... 3  Specific Safety Rules ... 4  Symbols ... 5-6  Features ... 7-8  Assembly ... 8-12  Operation ... 13-15  Maintenance ... 16-18  Troubleshooting ... 19 ...

  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or carbon monoxide poisoning which will cause death or serious personal injury. READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT ...

  • Page 4: Specific Safety Rules

     Never direct a water stream toward people or pets, or any electrical device.  Before starting any cleaning operation, close doors and windows. Clear the area to be cleaned of debris, toys, outdoor furniture, or other objects that could create a hazard.

  • Page 5: Symbols

    Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta- tion of these symbols will allow you to operate the tool better and safer. SYMBOL NAME Wet Conditions Alert Read The Operator’s Manual Eye Protection Safety Alert Hot Surface...

  • Page 6

    To avoid serious personal injury, do not attempt to use this product until you read thoroughly and understand completely the operator’s manual. If you do not under- stand the warnings and instructions in the operator’s manual, do not use this product. Call Husky customer service for assistance.

  • Page 7: Features

    PRODUCT SPECIFICATIONS Engine ... Briggs and Stratton Q45 Fuel Tank Capacity ...1 quart (.95 liters) Maximum Pounds Per Square Inch Pressure ... 2,200 psi Maximum Gallons Per Minute ...2.0 GPM * No representation is made as to the horsepower of the Briggs & Stratton Q45 OIL CAP / DIPSTICK RECOIL...

  • Page 8: Assembly, Features

    KNOW YOUR PRESSURE WASHER See Figure 1. The safe use of this product requires an understanding of the information on the tool and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules.

  • Page 9

    NOTE: Do not start the pressure washer until the engine has been filled with oil, all hoses are connected, and the water is turned on. Running this machine without oil will damage the engine;...

  • Page 10

    When adding gas to the pressure washer, make sure the unit is sitting on a flat, level surface. If the engine is hot, let the pressure washer cool before adding gas.

  • Page 11

     When not in use, remove the spray wand extension from the spray wand by turning the connector counter clock- wise. Store both pieces on top of the pressure washer. CONNECTING HIGH PRESSURE HOSE TO SPRAY WAND ASSEMBLY Figure 6.

  • Page 12

    To connect the garden hose to the machine:  Uncoil the garden hose. NOTE: There must be a minimum of 10 feet of unrestricted hose between the pressure washer intake and the hose faucet or shut off valve (such as a “Y” shut off connector).

  • Page 13: Operation

    WARNING: Do not allow familiarity with tools to make you care- less. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING: Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury.

  • Page 14

    NEVER change nozzles without locking the lock out on the spray wand. Using the quick-connect collar, changing nozzles is easy.  Turn off the pressure washer and shut off the water supply. Pull trigger to release water pressure. To connect a nozzle to the spray wand: ...

  • Page 15

    STORING THE PRESSURE WASHER See Figure 14. Store the pressure washer with the gas tank empty by either draining the tank or running the pressure washer until the gas runs out. Allow 30 minutes of “cool down” time before storing the machine.

  • Page 16: Maintenance

    WARNING: When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage. WARNING: Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust. If operation is dusty, also wear a dust mask. WARNING: Before inspecting, cleaning or servicing the machine, shut off engine, wait for all moving parts to stop, and discon-...

  • Page 17

    Excessive pump pressure (a pulsing sensation felt while squeezing the trigger) may be the result of a clogged or dirty nozzle.  Turn off the pressure washer and shut off the water supply. Pull trigger to release water pressure.  Remove the nozzle from the spray wand.

  • Page 18

    See Figure 20.  Run engine out of gas. Allow 30 minutes of “cool down” time.  Place the pressure washer on blocks and put a container under the pressure washer.  Remove the oil drain plug and drain NOTE: Drain the oil while the engine is still warm but not hot.

  • Page 19: Troubleshooting

    PROBLEM Engine fails to start Engine hard to start Engine lacks power Detergent fails to mix with spray Pump doesn’t produce pressure Machine doesn’t reach high pressure TROUBLESHOOTING CAUSE 1. No fuel in tank 2. Spark plug shorted or fouled 3.

  • Page 20

    NOTES...

  • Page 21: Warranty

    A. Tune-ups – Air filters, gas filters, spark plugs B. Wear items – Hoses, connector fittings, spray nozzles, wheels, spray wand, detergent bucket, detergent tank Techtronic Industries North America, Inc. reserves the right to change or improve the design of any HUSKY brand pressure ®...

  • Page 22

    OPERATOR’S MANUAL GASOLINE PRESSURE WASHER HU80522 WARNING: The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. CALIFORNIA PROPOSITION 65 • SERVICE Now that you have purchased your tool, should a need ever exist for repair parts or service, simply contact your nearest Authorized Service Center.

Comments to this Manuals

Symbols: 0
Latest comments:
  • David barwin Aug 25, 2014 03:17:
    Need a gass tank and carburetor​, part numbers and cost.