Loading Paper; Loading Paper In Tray 1 (Bypass Tray) - Xerox Phaser 5335 User Manual

4.2

Loading Paper

This section explains how to load paper in Tray 1 (Bypass Tray) or trays 2 - 5.

Loading Paper in Tray 1 (Bypass Tray)

Important
• Load paper when the power is switched on.
• Do not load paper of different types simultaneously.
• Do not remove or add paper to Tray 1 (Bypass tray) while printing from Tray 1. Doing so can cause
paper jams.
• Do not place any objects other than paper on or in Tray 1 (Bypass tray). Do not push down on the tray
or apply an excessive amount of force to the tray.
1. Pull Tray 1 open.
2. When loading long paper, extend the
extension tray until it stops (until it clicks
into place). If the tray is not long enough,
extend it all the way.
3. Load the paper with the print side facing
down.
62
4 Paper