Xerox Phaser 5335 User Manual page 161

4. Hold the print cartridge by the handles as
shown in the figure and remove the print
cartridge from the printer.
Note
• When removing the print cartridge, slide the cartridge
towards you.
Important
• Be careful not to dirty your hands or clothes with toner.
If toner gets on your hands or clothes, wash it off
immediately.
5. Remove the new print cartridge from its
packaging.
Important
• Do not touch the photoconductor (drum) protection
shutter and photoconductor (drum) of the print
cartridge.
6. Hold the print cartridge horizontally.
Gently shake the cartridge ten times or so
in the direction shown in the figure to even
out the toner inside.
Important
• Make sure to hold the cartridge by the handles at both
ends as shown in the figure and slowly shake it.
photoconductor
(drum)
photoconductor (drum)
protection shutter
7.1 Replacing Consumables
143