Setting The Paper Sizes Of The Trays - Xerox Phaser 5335 User Manual

Setting the Paper Sizes of the Trays

Use the following procedure when setting non-standard paper sizes for Tray 1 or trays 2 -
5. If you loaded non-standard-size paper into tray 2, 3, 4 or 5, set the paper size dial to [
Note
• If you changed the paper loaded in tray 2, 3, 4 or 5 from non-standard-size paper to standard-size paper,
set the size of the paper with the paper size dial and not on the control panel.
1. Press the
control panel to display the menu screen.
2. Press the < > button until [Admin Menu] is
displayed.
3. Press the < > button to accept the
selection.
[Network/Port] is displayed.
4. Press the < > button until [Printer
Settings] is displayed.
5. Press the < > button to accept the
selection.
[Substitute Tray] is displayed.
6. Press the < > button until [Paper Size] is
displayed.
7. Press the < > button to accept the
selection.
[Tray 2] is displayed.
8. Press the < > button until the desired tray
is displayed. Press the < > button to move
to the right field and then press the < >
button.
[Tray 2 Custom] is displayed.
9. Press the
confirm your selection.
[Portrait (Y)] is displayed.
10. Press the < > button to select [Portrait
(Y)].
The current setting is displayed.
11. Enter the length using the < > or < >
button and press the
button to confirm your entry.
(Example: 431 mm)
<Menu> button on the
<OK/Eject> button to
<OK/Eject>
Menu
Print Language
Menu
Admin Menu
Admin Menu
Network / Port
Admin Menu
Printer Settings
Printer Settings
Substitute Tray
Printer Settings
Paper Size
Paper Size
Tray 2 A4-P*
Paper Size
Tray 2 Custom
Tray 2 Custom
Portrait (Y)
Portrait (Y)
148mm*
Portrait (Y)
431mm
4.2 Loading Paper
].
*
69