Connecting A Cable - Xerox Phaser 5335 User Manual
Xerox phaser 5335 laser printer user guide
Hide thumbs
Also See for Phaser 5335:
- Printing manual (110 pages) ,
- Installation manual (17 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
1.2
Connecting a Cable
Connect the printer to your computer using an interface cable appropriate for your
connection method.
An interface cable is not included with the printer. You must purchase it separately.
Parallel Connection
1.
Switch the printer off.
2.
Plug the parallel cable into the interface connector on the printer.
Secure the parallel cable into the connector using the clips on both sides of the
connector.
3.
Plug the other end of the parallel cable into your computer.
4.
Switch the printer on.
USB Connection
When using USB connection, install a print driver on your computer before connecting the
cable. For installation instructions, refer to "1.6 Installing a Print Driver" (P. 16) or the
Documentation CD-ROM.
1.
Switch the printer off.
2.
Plug the USB cable into the interface connector on the printer.
3.
Plug the other end of the USB cable into your computer.
4.
Switch the printer on.
4
1 Printer Environment Settings
Advertisement
Table of Contents
