Operating The Remote Control And Mounting The Holder - Hunter 41922-01 Installation And Operation Manual

9-1. e remote transmitter has individual buttons for turning the
fan off and on and controlling the light and fan speed.
9-2. For best operation, start the fan by pressing high, then select
your desired speed.
9-3. e light button turns the light on to full brightness. To dim the
light, hold the light button down until you reach your desired
brightness. Push the light button again to turn off the light.
9-4. Press the OFF button to turn the fan off.
9-5. When necessary, replace the battery with a 12-volt type 23A,
MN-21 battery or equivalent.
9-6. You can mount the remote holder to any toggle switch plate
with the screws already in the switch plate. Or, you can simply
mount the remote holder on the wall.
41922-01 • 02/26/07
9• Operating the Remote Control and Mounting the Holder
Fan Speed
High
Fan Speed
Low
Steps 9-1 – 9-4
Step 9-5
Step 9-6
Fan Speed
Medium
Fan Off
Fan Light
13
Hunter Fan Company