Table of Contents
Advertisement
Quick Links
For Your Records and Warranty
Assistance
Model Name: _____________________
Catalog/Model No.: ________________
Date Purchased: ___________________
Where Purchased: _________________
For reference also attach your receipt or a
copy of your receipt to the manual.
Hunter Fan Company
41532-01 • 09/04/13
Advertisement
Table of Contents
Related Manuals for Hunter 41532-01
Summary of Contents for Hunter 41532-01
- Page 1 For Your Records and Warranty Assistance Model Name: _____________________ Catalog/Model No.: ________________ Date Purchased: ___________________ Where Purchased: _________________ For reference also attach your receipt or a copy of your receipt to the manual. Hunter Fan Company 41532-01 • 09/04/13...
-
Page 2: Table Of Contents
Before installing your fan, for your records and warranty assistance, record the information from the carton and the Hunter nameplate label (located on the top of the fan motor housing). Cautions and Warnings • Read this entire manual carefully before beginning installation. Save these instructions. -
Page 3: Optional Accessories
Optional Accessories Understanding Mounting Hunter’s patented mounting system provides you maximum ease in installing your fan. This fan was designed to be mounted only on flat ceilings and can be used only on ceilings no less than 8 feet high. -
Page 4: Getting Ready
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 70 lbs (31.8 kg) pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •... -
Page 5: Pre-Installation
(walls, posts, etc.) should be within 30” of the tips of the blades (see Fig. 1). Your Hunter fan comes with the proper hardware to hang the fan from a 8 foot ceiling so the fan blades will be 12” from the ceiling and approximately 7 feet from the floor (see Fig. 1). -
Page 6: Installing Ceiling Hardware
Use a 3/8” wrench to install the (2) 3 1/2” lag bolts to secure the U-bracket to the joist (see Fig. 2). Exploded View Installed View Cross Brace Ceiling Outlet Rubber Bushing and Pin U-Bracket Lag Bolt Fig. 2 3 1/2” Lag Bolt Hunter Fan Company 41532-01 • 09/04/13... -
Page 7: Hanging The Fan
3. Screw the pipe into the fan until tight (at least 4 1/2 turns) (see Fig. 4). NOTE: Some of the pipe threads may still be visible. Hanger Wires Pipe Motor Motor Housing Housing Set Screw Fig. 3 Fig. 4 Hunter Fan Company 41532-01 • 09/04/13... - Page 8 9. Lift the fan by the motor housing. Hook the hanger bracket assembly onto the rubber bushing and pin. Ensure both ends of the pin are outside the hanger bracket assembly (see Fig 7). Rubber Bushing and Pin Hanger Bracket Assembly Fig. 7 Hunter Fan Company 41532-01 • 09/04/13...
-
Page 9: Wiring The Fan
Fig. 9 7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. Hunter Fan Company 41532-01 • 09/04/13... -
Page 10: Installing The Canopy
2. Slide canopy up close to ceiling. 3. Tighten the canopy assembly screws (see Fig. 10). 4. Tighten the canopy set screw (see Fig. 10). Canopy Canopy Set Screw Canopy Assembly Screw Fig. 10 Hunter Fan Company 41532-01 • 09/04/13... -
Page 11: Lubrication
This unique lubrication system is one reason your Original Hunter Ceiling Fan will last a lifetime. It is highly unlikely that you will ever need to add oil to you Original fan once it is installed. Should you move your fan to another location, it is a good idea to check the oil reservoir. -
Page 12: Fan Blade Assembly
For four blades, use the inner row (see Fig. 14). Outer Row Grommet Blade Inner Row Grommet Fig. 13 Blade Assembly Screws Blade Mounting Screw Fig. 14 Hunter Fan Company 41532-01 • 09/04/13... -
Page 13: Operation And Care
To Reverse The Flow Of Air. 1. Move the directional lever down for down draft (see Fig. 15). 2. Move the directional lever up for up draft (see Fig. 15). Directional Lever DOWN Fig. 15 Hunter Fan Company 41532-01 • 09/04/13... -
Page 14: Energy Star
Energy Star Hunter fans have the power to cut your cooling costs up to 40%. Beat the High Cost of Cooling The air movement created by a Hunter ceiling fan lets you set your thermostat higher and still stay comfortable. Every degree you raise the thermostat saves up to 7% on energy costs. -
Page 15: Troubleshooting Guide
1. If your fan wobbles when operating, use the enclosed balancing kit and instructions to balance the fan. If you need parts or service assistance, please call 888-830-1326 or visit us at our WEB site at http://www.hunterfan.com. Hunter Fan Company 7130 Goodlett Farms Pkwy. #400 Memphis, Tennessee 38016 Hunter Fan Company 41532-01 • 09/04/13...