Operating The Remote Control And Mounting The Holder - Hunter 25745 Owner's Manual And Installation Manual

9 • Operating the Remote Control and Mounting the Holder
9-1. The remote transmitter has individual buttons for turning the fan
off and on and controlling the light and fan speed.
9-2. For best operation, start the fan by pressing high, then select your
desired speed.
9-3. The light button turns the light on to full brightness. To dim the
light, hold the light button down until you reach your desired
brightness. Push the light button again to turn off the light.
9-4. Press the OFF button to turn the fan off.
9-5. When necessary, replace the battery with a 12-volt type 23A,
MN-21 battery or equivalent.
9-6. You can mount the remote holder to any toggle switch plate with
the screws already in the switch plate. Or, you can simply mount
the remote holder on the wall.
Step 10-5
14
42419-01 • 11/24/08 • Hunter Fan Company
Fan Speed
High
Fan Speed
Low
Steps 10-1 – 10-4
Fan Reverse
Fan Speed
Medium
Fan Off
Fan Light
Step 10-6