Table of Contents
Advertisement
11-1. e remote transmitter has four numerical buttons:
0 = Off
1 = Low speed
2 = Medium speed
3 = High speed
11-2. For best operation, start the fan by pressing 3 (high), and then
select your desired speed.
11-3. e reversing switch reverses the direction of the fan.
11-4. e up dimmer turns the light on and can be used to increase
the brightness if the light is already on.
11-5. e down dimmer turns the light off. You can also use it to dim
the light.
11-6. When necessary, replace the battery with a 12-volt type 23A,
MN-21 battery or equivalent. e battery compartment is on
the back.
11-7. You can mount the remote holder to any toggle switch plate
with the screws already in the switch plate. Or, you can simply
mount the remote holder on the wall.
41869-01 • 03/12/04
11 • Operating the Remote Control and Mounting the Holder
Reversing
Switch
Down
Dimmer
Steps 11-1 – 11-5
Step 11-7
Up
Dimmer
15
Step 11-6
Hunter Fan Company
Advertisement
Table of Contents
