Installing an accessible 5¼ inch drive
►
Open the casing (see "Opening the casing").
►
If a Weight Saver is present, remove this first: Remove the screws (1) and pull the Weight
Saver out of the casing (2).
Do not discard the Weight Saver. For cooling, protection against fire, and in order to
!
comply with EMC regulations, you must refit the Weight Saver if you remove the drive
again later.
►
Take the new drive out of its packaging.
►
Make the required settings on the drive.
A26361-K994-Z220-1-7619, Edition 2
1 1
System upgrades
2
67