Installing The Cross-Piece - Fujitsu CELSIUS M4 Series Operating Manual

Installing the cross-piece

a
► Insert the cross-piece at a slight angle into its brackets (a) on the back of the casing.
► Press the cross-piece into the casing in the direction of the arrow (1) until the lugs (b) of the
cross-piece hook into the brackets (c) in the casing.
► Install the side fan (see "Installing the side fan").
► CELSIUS M only: Install the ventilation duct and the rear fan (see "Installing the ventilation duct
(CELSIUS M)" and "Installing the rear fan").
► Close the casing (see "Closing the casing").
Take care not to damage the cables when installing the cross-piece.
!
A26361-K994-Z220-1-7619, Edition 2
a
2
c
2
1
b
System upgrades
47