Indicators On The Device - Fujitsu CELSIUS M4 Series Operating Manual

Operation

Indicators on the device

The indicators are on the front of the casing. Which indicators are available on your device depends
on the configuration level you have selected.
CELSIUS M / R:
LCD-display
The LCD-display lights up as soon as the workstation is switched on. Depending on the operating
state, up to ten symbols may be displayed.
During the boot process the BIOS status indicators (Postcodes) are shown. Please refer to the
mainboard manual for information on the Postcodes
Power on / workstation on
Appears on the LCD as soon as the workstation is switched on.
Standby/ Energy saving mode
Appears on the LCD as soon as the workstation is in energy saving mode. The
workstation can be switched on with the ON/OFF switch.
Hard disk
Appears on the LCD as soon as the hard disk is accessed.
X
Error
Appears on the LCD if there is a hardware error in the workstation or if a critical
hardware state arises (e.g. fan failure, high temperature). You can use DeskView to
get detailed information on the problem that occurred. If in any doubt, consult your
administrator.
18
1 = LCD-display
2 = Drive indicator, e.g. DVD
3 = Power-on indicator
1
2
3
A26361-K994-Z220-1-7619, Edition 2