Removing A Short Board - Fujitsu CELSIUS M4 Series Operating Manual

System upgrades
If you have installed or removed a PCI board, please check the relevant PCI slot settings in
i
the BIOS Setup. If necessary, change the settings. Further information is provided in the PCI
board documentation.
The slots 1, 3, 5 and 7 are suitable for low-profile cards with an adapter. The slots are
counted from the bottom to the top.

Removing a short board

► Open the casing (see "Opening the casing").
► Remove the fan (see "Removing the side fan").
► Remove the cross-piece if it is in the way (see "Removing the cross-piece ").
► Disconnect the cables connected to the board.
1
2
1
3
► Press on the clips (1) in the direction of the arrow and unhook them from the casing rear panel.
► If the board in question is a graphics card, undo the catch.
► Fold open the locking rail in the direction of the arrow (2).
► Pull the board out of the slot (3).
► Place the board into appropriate packaging.
For cooling, protection against fire, and in order to comply with EMC (electromagnetic
!
compatibility) regulations, you must refit the slot cover.
56 A26361-K994-Z220-1-7619, Edition 2