Installing the heat sink (CELSIUS M)
2
2
2 2
►
Insert the heat sink into the casing in the direction of the arrow (1).
►
Fasten the screws (2).
►
Install the cross-piece (see "Installing the cross-piece").
►
Install the side fan (see "Installing the side fan").
►
Install the ventilation duct and the rear fan (see "Installing the ventilation duct (CELSIUS M)"
and "Installing the rear fan").
►
Close the casing (see "Closing the casing").
Installing and removing a board
Please take note of the section "Information about boards".
!
The following illustrations show the CELSIUS R. The sequence of actions is identical for all
i
device variants and configuration levels.
The number, position and arrangement of the board slots on the mainboard can be found in the
manual for the mainboard. Boards may already be installed on shipment.
A26361-K994-Z220-1-7619, Edition 2
1
System upgrades
53