NordicTrack INCLINE TRAINER X5I INTERACTIVE User Manual page 9

6. Set the Console Cover (87) on the Uprights (77,
79). Make sure that the Console Cover is ori-
ented with the ties toward the bottom as shown.
Attach the Console Cover (87) with the two #8 x
1 1/2" Screws (104) that you removed in step 4.
Start both Screws, and then tighten each of
them. Do not overtighten the Screws.
Insert the Upright Wire (78) through the loops in
the ties.
7. Have a second person hold the Left Pulse
Handrail (86) near the Left Upright (77). Insert
the Left Pulse Wire (90) from the Left Pulse
Handrail through the hole in the Left Upright and
pull it out of the hole in the side of the Left
Upright. Then, insert the Left Pulse Wire through
the loops in the ties.
Attach the Left Pulse Handrail (86) to the Left
Upright (77) with two 3/8" x 5" Bolts (34) and
two 3/8" Star Washers (8). Do not fully tighten
the Bolts yet.
Attach the Right Pulse Handrail (102) to the
Right Upright (79) as described above. Then,
tighten all four 3/8" x 5" Bolts (34).
6
Ties
78
79
7
102
8
91
Ties
34
79
9
87
104
77
Ties
90
34
8
77
86
Hole