Cutting Using The Small Work Plate; The Locations Of The Origin Points - Roland JEWELA JWX-10 User Manual

4-1 Cutting Using the Small Work Plate

The Locations of the Origin Points

When you perform cutting using a work plate, you set three origin points: the X, Y, and Z origins. The X and Y origin
points serve as the start location for cutting. You normally align the Z origin point with the surface of the workpiece. In
any case, make the settings to match the size of the workpiece and the length of the cutter.
XYZ origin point
40 Chapter 4 Feature Reference
Y axis
Z axis
X axis