Switching The Power On And Off; Starting The System - Roland JEWELA JWX-10 User Manual

3-1 Switching the Power On and Off

Starting the System

1.
Start the machine.
28 Chapter 3 Operation
Close the front cover.
Front cover
Switch on the main power switch.
The POWER light comes on.
Press the Sub power button.
The machine starts up, and initialization is performed.
After initialization ends, the ENGRAVING light and the VIEW light
comes on and the machine is paused.
Press the VIEW button.
The view state is canceled, and the machine finishes preparations
for receiving cutting data.