Roland JEWELA JWX-10 User Manual page 36

3-2 Getting Ready for Cutting Using the Rotary Axis
3.
Make the setting for the Z origin point.
Close the front cover.
Press the VIEW button to make the VIEW light go out.
Wait until operation has stopped completely, then open the front cover.
Sensor cable
34 Chapter 3 Operation
Use the operation panel screen, select
[Set the Z origin at the center of rota-
tion].
Select [Start Detection].
Click [Continue].
The cutter automatically makes contact with the sen-
sor, and the Z-axis origin point is set.
Detach the sensor cable.