Chapter 5 Remote Interface Reference
Frequency Configuration Commands
Frequency Configuration Commands
See also "Frequency Measurement Configuration" in chapter 4 starting on
page 118.
[SENSe:]
FREQuency:RANGe:LOWer {3|20|200|MIN|MAX}[,(
FREQuency:RANGe:LOWer? [{(
Specify the lowest frequency expected in the input signal for frequency
measurements on the specified channels. The instrument selects a slow,
medium (default), or fast measurement timeout based on the frequency
you specify. MIN = 3 Hz. MAX = 200 Hz. The :LOW? query returns the
timeout setting on the specified channels. Returns "3", "20", or "200".
@
ch_list
@
<
>)|MIN|MAX}]
<
ch_list
>)]
5
225