Table of Contents
Advertisement
Chapter 1 Quick Start
Installing HP BenchLink Data Logger Software
Installing HP BenchLink Data Logger Software
If you ordered the HP 34970A with the internal DMM , then the
HP BenchLink Data Logger software is included. The software is
shipped on one CD-ROM , but includes a utility to build installation
floppy disks. To install the software on your PC , you will need a
minimum of 12 MB of free disk space.
For system requirements and additional details on the features of the
software, refer to the specifications in chapter 9.
Installation Procedure
If you are running Windows 95 or Windows NT 4.0
1. Insert the CD-ROM into your drive.
2. Select Settings | Control Panel from the Start menu. Double-click on
the Add/Remove Programs icon.
3. Select the Install/Uninstall tab on the Add/Remove Programs property
sheet. Click on Install and follow the on-screen instructions.
If you are running Windows
1. Insert the CD-ROM into your drive.
2. Select File | Run from the Program Manager menu bar.
3. Type <drive> :\setup , where drive is the letter representing your
CD-ROM drive. Click OK to continue and follow the on-screen
instructions.
18
3.1
®
®
Advertisement
Table of Contents
