Chapter 1 Quick Start
To Connect Wiring to a Module
To Connect Wiring to a Module
1 Remove the module cover.
3 Route wiring through strain relief.
Cable Tie Wrap
(optional)
5 Install the module into mainframe.
20
2
4
Wiring Hints...
Channel Number:
Slot Channel
Connect wiring to the screw terminals.
Replace the module cover.
For detailed information on each module,
refer to the section starting on page 163.
To reduce wear on the internal DMM relays,
wire like functions on adjacent channels.
For information on grounding and shielding,
see page 335.
The diagrams on the next page show how to
connect wiring to a multiplexer module for
each measurement function.
Typical
20 AWG
6 mm